| Description: |
The Mercury F line-up model centre channel effects loudspeaker.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Recommended amplifier power 10 - 90 Watts RMS
Continuous power handling 70 Watts RMS
Peak output power 140 Watts
Low frequency response 68Hz
Sensitivity 90dB
Nominal impedance 8 ohms
Frequency response 38Hz - 20kHz
DRIVE UNITS
High frequency 25mm(1") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly
Low frequency 2 x 100mm (4") coated multi-fibre paper pulp cone
CROSSOVER
Frequency 2.7kHz
Type 4th order acoustic linkwitz-riley
CONSTRUCTION
Enclosure type Front reflex. 15mm (5/8) particle board, internally cross-braced enclosure.
Shielding Yes
Volume 5.3 litres (0.2 cubic feet)
Dimensions 150 x 430 x 170mm (5 7 / 8 x 16 7 / 8 x 67 / 8
Weight 5.3kg (15.2lbs)
Finish Apple
INTRODUCTION
The New Tannoy Mercury F range offers a choice of loudspeakers for home cinema or hi-fi applications of truly outstanding performance and value. The Mercury F line-up comprises two bookshelf models, two floor-standers, a centre channel and a rear effects loudspeaker.
All Mercury F models are fully magnetically shielded to prevent colour fringing effects when the speakers are placed close to a TV or monitor. Mercury F2, 3 and 4 are equipped with bi-wire terminals allowing additional system optimisation.
Materials and components have been carefully selected to maximise the system performance and offer real acoustic benefits. Solid wood material for the cabinet construction, including a substantial 19mm MDF front baffle, provide the essential cabinet rigidity required of a good loudspeaker design. To cater for both modern and more traditional décor, all the models are offered in either an apple wood or dark oak vinyl veneer.
|
